Lucidity Configuration Aid

Don't worry if all the information is not readily available for all questions - this can be discussed with UVS. The more information that is available, the more accurate the configuration of video wall controller that can be made & hence more accurate cost.

1. Display outputs

although UVS will not be providing the interconnection between the video wall controller HDMI outputs and the video wall displays, these need to be high quality signal transmission systems, like HDMI to CAT6 extenders, which are connected via point to point RJ45 terminated CAT6 shielded cables, or high quality HDMI OAC cables capable for the HD or 4K signals being transmitted

2. What type of source content is required to be seen on the video wall and therefore required as a source input to the video wall controller

Note: in control rooms we don't see any needs for 4K@60Hz, if it is required we have to use a specific input card in a larger controller frame which significantly increses costs
for composite video inputs we normally convert them to IP streams and display them via RTSP streams using an IP decoder input card
if client says all streams are at 1920x1080 resolution @30Hz, and they say they want to display e.g. 12x camera streams per HD video wall display, it does not make sense to have all HD streams being used for the video wall. If they can give us a lower resolution stream, like 1280x720, it will significantly reduce the cost of the video wall controller by reducing the number if IP decoding cards required
Can they give you any examples of the web pages, do the web pages have any video content

3. Lucidity Videowall Control Software

All controllers are provided with Windows 11 IoT Enterprise LTSC COA

(except WBC90/110 which are currently Windows 10 LTSC 2019 OS)

Please do not hesitate to contact us as below for any assistance or queries.
See the video wall controller and control room technology capabilities here.